Distiller Luxstal 8m 37l

Description

Pure alcohol 96.6° in rectification mode

3-inch column - the key to high speed

The alcohol distillation rate is up to 2.2 l/hour. This is approximately 2-2.5 times higher than 2-inch analogues. The difference is achieved due to the diameter of the column: the larger the diameter, the more alcohol vapor the column passes per unit time, and the higher the distillation speed.

The cross-sectional area of ​​a 3-inch Luxsteel column is 2.25 times the area of ​​any 2-inch column.

Maximum cleaning. 2 drawers and 4 kg SPN included

The presence of SPN is necessary for a distillation column, since it is this column that ensures the maximum degree of purification of alcohol vapors from impurities, providing the output with strong, pure alcohol without impurities. The Luxstal device is equipped with SPN by default.

Up to 13 l/h in direct flow mode

Whiskey, brandy, cognac, distillates and other aromatic drinks

The higher the speed, the better the flavor

The first distillation takes place quickly, so the dead yeast cooks less and transmits less of its unpleasant odor to the drink. Due to this, the finished product has a clean, pleasant aroma.

Ideal for aromatic distillates

Whiskey, gin, brandy and other aromatic drinks are distilled in the first distillation mode in order to preserve the aroma of the original raw material as much as possible. It is in this mode that you can make a real original drink at Luxstal.

Powerful refrigerator for maximum speed

3-inch, 15 tubes, 7 baffles provide enormous recycling capacity. The refrigerator can easily cope with heating up to 6.5 kW and provides a speed of up to 13 l/h.

Prepare aromatic drinks directly in the cube

Beer, mash, wine, cider, mead and others

The device is perfect for primary fermentation drinks. The design has everything for this.

Electronic thermometer for complete control of fermentation

Temperatures that are too high can kill the yeast; temperatures that are too low can “freeze” them. In order for fermentation to proceed correctly, the temperature must be kept in a certain range - approximately 20-30°C. A convenient electronic thermometer, which has an accuracy of up to 0.1°C and instantly displays any temperature changes, will help you track and correct readings.

Communication tube with the atmosphere as a water seal

The water seal protects the mash from souring. It ensures the tightness of the container, while releasing carbon dioxide that occurs during fermentation. In Luxstal, its function is performed by a communication tube with the atmosphere with a hose connected to it. Gases escape through it, the mash “breathes”, but does not interact with the environment - optimal conditions are created for the ripening of the product.

Universal tank for fermentation and distillation

Distill moonshine in one tank, then ferment cider or brew beer in it - this way it will always be in use.

Advantageous set. Everything you need is in the box

4.8 kg SPN

SPN is an accessory necessary for producing alcohol. It is this that ensures the necessary separation of vapors into fractions inside the column, without which a strong, clean drink cannot be obtained. It also happens to be the most expensive of the extras, which is already included in the kit.

2 insulation for drawers

The insulation stabilizes distillation, reducing the amount of “wild” phlegm and simplifying the separation of alcohol vapors into fractions. Comes included

Adapters, hoses, diverter, etc.

Everything you need to get the device up and running. In addition to the above, the kit includes a book with recipes and detailed operating instructions.

Easy to use, even a beginner can handle it

Just turn the tap to get alcohol

Pour in the raw material, assemble the apparatus, turn on the heat, set up the column (detailed instructions included) and at the right time open the tap to get alcohol. All! Almost the same as pouring water from a tap.

The volume of the cube is not limited

Use the expansion module and cook even more!

Easy quick fixation

Initial volume - 37 l. Each module increases the volume by 20 liters. Attached with an adjustable clamp and reinforced seal.

Seamless connection thanks to reinforced seal

The seal is placed at the junction of the cube and the enlargement module. It has a metal “skeleton” inside with locking legs, thanks to which it is always installed in the correct position without distortion. Excellent tightness allows you to install several modules on top of each other.

Optimal for all types of distillations

The advantage of a modular cube is that the first distillation of a large volume of mash can be carried out in full assembly with all modules, and the second, when the volume of the product is smaller, without modules. This allows you to save - less heat loss, faster heating, lower minimum balance.

More information about the cube enlargement module

Other benefits. Every detail is for your convenience

Built-in diopter.Allows you to observe live distillation (phlegm).

Herringbone fittings for securely fixing hosescooling.

Pressure relief valve.Safety net in case of excess pressure in the cube. Any excess goes out through this node.

Dome cover as protection against foam driftdue to the formation of additional volume of the cube.

Connection with the atmosphere.Provides a stable exit of the product from the device without shocks.

Large diameter tap (3/4)allows you to quickly drain distillation residues, including thick grain and fruit mashes.

Works on all types of stovesthanks to the 3-layer ferromagnetic bottom, it is possible to connectTHERE.